100% Pass 74-409 Exam By Training Lead2pass New Microsoft 74-409 VCE And PDF Dumps (31-40)

admin   March 11, 2015   Comments Off on 100% Pass 74-409 Exam By Training Lead2pass New Microsoft 74-409 VCE And PDF Dumps (31-40)

QUESTION 31

Hotspot Question
A company has a single Active Directory Domain Services (AD DS) domain and four Windows Server 2012 R2 servers that have the Hyper-V role installed.
The company uses System Center 2012 R2 Virtual Machine Manager (VMM) to manage the Hyper-V environment. One set of Hyper-V host servers is dedicated for use by the development
environment.

A second set of Hyper-v host servers is dedicated for use by the production environment.
The network architects assign the IP address subnets as shown in the following table:
1_thumb_thumb

The network architects also prepare a network design for the Hyper-V environments as shown in the Network Design exhibit. (Click the Exhibit button.)

2_thumb_thumb

The implementation team reports a problem with IP addressing as shown in the Network
Error exhibit. (Click the Exhibit button.)
3_thumb_thumb

You need to ensure that the implementation team can implement the network design successfully.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.
4_thumb_thumb
Answer:

5_thumb_thumb

QUESTION 32
A company plans to create a Hyper-V test environment that will contain three virtual machines (VMs).
The VMs are projected to grow 1 GB in size each day.
The VMs will be configured as follows:
You must minimize the required amount of storage space by using the least amount of administrative effort.
You need to recommend a storage solution.
Which type of virtual disk type should you configure for each VM?

6_thumb_thumb

A.    differencing
B.    dynamically expanding
C.    fixed
D.    pass-through

Answer: B
Explanation:
http://www.petri.co.il/choosing-hyper-v-storage-virtual-hard-disks-2.htm
http://searchservervirtualization.techtarget.com/tip/Fixed-vs-dynamic-disks-for-Hyper-Vvirtual-machines

QUESTION 33
Drag and Drop Question
You administer the following Windows Server 2012 R2 Hyper-V environment:

7_thumb_thumb

The environment also contains a computer named WORKSTATION1 that runs Windows 8.
You need to perform maintenance on SERVER1.
You have the following requirements:
– Perform live migration for VM-APP1.
– Use one of the Hyper-V management tools on WORKSTATION1 to perform the live migration tasks.
You need to migrate VM-APP1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

8_thumb_thumb

Answer:

9_thumb_thumb

QUESTION 34
Hotspot Question
You have an environment that contains the servers as shown in the following table:

10_thumb_thumb

You purchase a physical server that supports out-of-band management to deploy as a bare-metal Hyper-V host server.
Administrators must be able to deploy standard Hyper-V host server images to bare-metal computers by using the least amount of administrative effort.
You need to prepare the environment.
What should you use? To answer, select the appropriate option from each drop-down menu in the answer area.

11_thumb_thumb

Answer:

12_thumb_thumb

QUESTION 35
You administer two servers that run Windows Server 2012 R2.
Both servers are part of a Hyper-V cluster.
The servers are configured as shown in the following diagram:
All of the .vhdx files are stored on DISK1.
You observe that the physical input/output (I/O) performance degrades when .vhdx files are accessed.
You need to improve performance.
Which two actions should you perform? Each correct answer presents part of the solution.

13_thumb_thumb

A.    Run the Windows PowerShell command Set-BCCache 10.
B.    On each host server, enable write caching for DISK1.
C.    Run the Windows PowerShell commandGet-ClusterSharedVolumeBlockCacheSizeInMB = 0.
D.    Run the Windows PowerShell command (GetCluster).SharedVolumeBlockCacheSizeInMB = 512.
E.    Run the Windows PowerShell command Get-ClusterSharedVolume “Disk1” | Set-ClusterParameter CsvEnableBlockCache 1.
F.    On each host server, disable write caching for DISK0.

Answer: DE

QUESTION 36
A company has offices in Hamburg, New York, and San Francisco.
The Hamburg office has one Hyper-V host server named HAM-HOST1.
The New York office has two Hyper-V host servers named NYC-HOST1 and NYC-HOST2.
The San Francisco office has one Hyper-V host server named SFC-HOST1.
All Hyper-V host servers run Windows Server 2012 R2.
You must deploy an application virtual machine (VM) that will be used by the sales team at the company.
You need to ensure that the VM remains available during unplanned system outages.
Which solution should you implement?

A.    a Hyper-V cluster that includes NYC-HOST1 and NYC-HOST2
B.    Server Message Block (SMB) 3.0 file shares on NYC-HOST1, NYC-HOST2, SFC-HOST1, and HAM- HOST1
C.    a Distributed File System (DFS) replication between NYC-HOST1, SFC-HOST1, and HAM-HOST1
D.    dynamic optimization on NYC-HOST1 and NYC-HOST2

Answer: A

QUESTION 37
You administer an environment that uses a Windows Server 2012 R2 Hyper-V cluster and System Center 2012 R2 Virtual Machine Manager (VMM).
You plan to deploy two virtual machines (VMs) that host a lineof-business (LOS) application.
The VMs must reside on the same Hyper-V host server at all times.
The LOB application does NOT require high availability.
You need to deploy the VMs.
What should you do?

A.    Add a custom property to both VMs, and assign the same value to each property.Configure the Hyper-V host cluster to use the same custom property and value. Configure a custom placement rule that uses filters that are based on the custom property and value.
B.    Configure the VMs to use the same VM network.
C.    Configure the VMs to reside on the same storage area networks (SANs).
D.    Add a custom property to both VMs, and assign the same value to each property.Configure the VMs as members of the same availability set.

Answer: A
Explanation:
http://blogs.technet.com/b/scvmm/archive/2013/03/11/custom-placement-rules-andavailability-sets-in-scvmm-2012-sp1.aspx

QUESTION 38
Hotspot Question
A company has a Windows Server 2012 R2 Hyper-V environment that includes two separate Active Directory Domain Services (AD DS) domains.
The environment also has three servers named HOST1, HOST2, and HOST3 that have the Hyper-V role installed.
HOST1 and HOST2 are configured as a failover cluster.
The environment is configured as shown in the following diagram:

14_thumb_thumb

You plan to deploy two new virtual machines named VM-Server1 and VM-Server2.
You have the following requirements:
– Deploy both virtual machines as a failover cluster.
– Utilize virtual hard disk (VHD) sharing for the cluster.
– The virtual machines must survive a host server hardware failure.
You need to deploy the virtual machines.
Use the drop-down menus to complete each statement based on the information presented in the screenshot. Each correct selection is worth one point.

15_thumb_thumb

Answer:

16_thumb_thumb

QUESTION 39
Drag and Drop Question
You administer a Windows Server 2012 R2 server that has the Hyper-V role installed.
The host server has the following configuration:

17_thumb_thumb

You deploy a new lab virtual machine named VM-SERVER3.
You need to ensure that VM-SERVER3 communicates only with VM-SERVER1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

18_thumb_thumb

Answer:

19_thumb_thumb

QUESTION 40
You administer the Hyper-V environment for a large organization.
The organization uses Windows Server 2012 R2 servers that have the Hyper-V role installed and System Center 2012 R2 Virtual Machine Manager (VMM).
You create a virtual machine template that has the Operations Manager 2012 R2 agent pre-installed.
You receive the following Operations console alert for all domain controller VMs that use the VM template:
The script ‘AD Replication Partner Op Master Consistency’ Failed to create object. ‘McActiveDir.ActiveDirectory’.
This is an unexpected error.
The error returned was ‘ActiveX component can’t create object’ (OxlAD)
The Active Directory Management Pack Objects (OOMADs) components are not installed on the Domain Controller.
These components are required for the monitoring scripts to run successfully.
See Alert Knowledge for additional details.
You need to correct the issue for the virtual machines that use the template.
What should you do?

A.    Configure the agent to run as a user account that is a member of the Domain Admins security group.
B.    In the Administration pane on the Operations console, create a Windows Run As Account containing a user account that is a member of the Domain Admins security group. Associate this Run As Account with the AD MP Account Run As Profile.
C.    in the Administration pane on the Operations Console, find the affected agent-managed computers and enable agent proxy.
D.    Install the Active Directory Management Pack helper object on the managed computers.

Answer: D

If you want to get more 74-409 exam preparation material,you can download the free brain dumps in PDF files on Lead2pass.It would be great help for your exam.All the dumps are updated and cover every aspect of the examination

http://www.lead2pass.com/74-409.html

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back