[2017 New] Free Lead2pass Microsoft 70-740 Exam Questions Download (31-40)

admin   June 2, 2017   Comments Off on [2017 New] Free Lead2pass Microsoft 70-740 Exam Questions Download (31-40)

2017 June Microsoft Official New Released 70-740 Q&As in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Good news, Lead2pass has updated the 70-740 exam dumps. With all the questions and answers in your hands, you will pass the Microsoft 70-740 exam easily.

Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-740.html

QUESTION 31
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand- alone Hyper-V host named Server1 at a secondary location.
A virtual machine named VM1 runs on Cluster1.
You configure a Hyper-V Replica of VM1 to Server1.
You need to perform a Test Fai lover of VM1.
Which tool should you use?

A.    the clussvc.exe command
B.    the cluster.exe command
C.    the Computer Management console
D.    the configurehyperv.exe command
E.    the Disk Management console
F.    the Failover Cluster Manager console
G.    the Hyper-V Manager console
H.    the Server Manager Desktop app

Answer: G

QUESTION 32
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016.
All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?

A.    the Multipath I/O feature
B.    the Routing role service
C.    the Network Controller server role
D.    the Canary Network Diagnostics feature
E.    the Data Center Bridging feature

Answer: CE

QUESTION 33
Note: This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 contains a virtual machine named VM1.
You need to ensure that you can use nested virtualization on VM1.
What should you run on Server1?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-WindowsFeature cmdlet
H.    the Optimize-VHD cmdlet

Answer: F

QUESTION 34
Your network contains a new Active Directory domain named contoso.com.
You have a security policy that states that new servers should run Nano Server whenever possible.
Which server role can be deployed on a Nano Server?

A.    Active Directory Domain Services
B.    DHCP Server
C.    Network Policy and Access Services
D.    Web Server (IIS)

Answer: D
Explanation:
A nano server cannot be ADDS, NPAS, or DHCP server. Recommended role is IIS Web Server.

QUESTION 35
You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1.
VM1 has resource metering enabled.
You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.
Which cmdlet should you run?

A.    Add-VMNetworkAdapteiAd
B.    Set-VMNetworkAdapter
C.    New-VMResourcePool
D.    Set-VMNetworkAdapterRoutingDomamMapping

Answer: A
Explanation:
Use the Add-VMNetworkAdapterACL command to specify which network to enable Resource Metering on.
If no ACLs are specified, metering will occur on all available networks.

QUESTION 36
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question

You have a Hyper-V host named Server1 that runs Windows Server 2016.
You plan to deploy several shielded virtual machines on Server1.
You deploy a Host Guardian on a new server.
You need to ensure that Server1 can host shielded virtual machines.
What should you run first?

A.    the Mount-VHD cmdlet
B.    the Diskpart command
C.    the Set-VHD cmdlet
D.    the Set-VM cmdlet
E.    the Set-VMHost cmdlet
F.    the Set-VMProcessor cmdlet
G.    the Install-WindowsFeature cmdlet
H.    the Optimize-VHD cmdlet

Answer: G

QUESTION 37
You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

A.    the dns.exe command
B.    the optionalfcaturcs.exe command
C.    the Install-Package cmdlet
D.    the Enable-WindowsOptionalFeature cmdlet

Answer: D
Explanation:
Enable-WindowsOptionalFeature is used to add DNS role to a Nano Server.

QUESTION 38
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2.
What should you do?

A.    RunNew-SRPartnershipand specify the -RephcationModeparameter.
B.    install the Failover Clustering feature and create a new cluster resource group.
C.    Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D.    RunSet-DfsrServiceConfigurationand specify the -RPCPortparameter

Answer: A

QUESTION 39
You have a Nano Server named Nano1.
You deploy several containers to Nano1 that use an image named Image1.
You need to deploy a new container to Nano1 that uses Image1.
What should you run?

A.    the Install-NanoServerPackage cmdlet
B.    theInstall-WindowsFeaturecmdlet
C.    the docker load command
D.    the docker run command

Answer: D

QUESTION 40
You deploy a Hyper-V server named Served in an isolated test environment.
The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2016.
You plan to deploy the following guest virtual machines on the server.

 

Which activation model should you use for the virtual machines?

A.    Multiple Activation Key (MAK)
B.    Automatic Virtual Machine Activation (AVMA)
C.    Original Equipment Manufacturer (OEM) key
D.    Key Management Service (KMS)

Answer: B

Once there are some changes on 70-740 exam questions, we will update the study materials timely to make sure that our customer can download the latest edition.

70-740 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDTzFiNkZZMGowWWs

2017 Microsoft 70-740 exam dumps (All 113 Q&As) from Lead2pass:

http://www.lead2pass.com/70-740.html [100% Exam Pass Guaranteed!!!]

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back